There are clients for Windows, OSX, Apple IOS (in the app store), Android (Google Play Store) and Linux below

IMPORTANT INFO

• USE PORT 10443

• Download the SSL Vpn clients for Windows, OSX and Linux below. Use only these versions as they are tested to be stable

• THE USER MUST BE ADDED TO THE DistrictVPN (ie. ADMVPN, CLKVPN, etc) group in the district's domain.  This group is a member of REMC1MemberVPNAccess at the root of the forest adremc1.org which is located in the ManagedServicesGroups OU. It may take up to 30min for replication to occur before you can add the user.

• The TSL 1.1 and 1.2 security protocols must be enabled (usually is by default), otherwise the connection will fail at 40%. The setting for that in Windows is under Internet options→Advanced. You can access Internet Options through either the Control Panel or through Internet Explorer.

• OUTSIDE VENDORS OR ENTITIES ONLY CONNECTING IN → must be given a LOCAL FORTIGATE USER and added to the REMC1-District-Ipsecvpn-SSLvpn group (Or a group that is made especially for the vendor for limited access)

• OUTSIDE VENDORS OR ENTITIES ONLY CONNECTING IN → If they only need DMZ access then only add them to the DMZvpn group on the fortigate. You can create other groups which will limit vendors to other areas. This is mentioned in the SSLvpn configuration wiki.

• ONLY FOR REMC1 Employees→ REMC1 EMPLOYEES ONLY MUST BE ADDED TO THE REMC1VpnUsers user group in the REMC1 domain

Windows Installation and connection

1. YOU MUST HAVE AN ACTIVE INTERNET CONNECTION TO INSTALL THIS CLIENT

2. Download and install 'FortiClientVPN7.0.8.msi'

3. Run the install.  Installation may require local admin privileges. At one point the install MAY download updates from Fortinet.  THIS MAY PAUSE FOR EVEN 10MIN AT 0% you must be patient it will continue if you have an internet connection

4. After running the install you should see a red shield on your desktop titled FortiClient.  Run this by double clicking
   
   

   Open

   

   FortiClient desktop icon display

5. You will get a FortiClient Console window. Select the 'Remote Access' tab and click the blue 'Configure VPN' link in the center of the white area (see picture below)

   Open

   

   Windows FortiClient console page, Configure VPN link display

6. Provide a connection name

7. The Remote gateway is fortigate.remc1.net for most individuals including SupportNet members, vendor, or other outside party. Otherwise please email or call support@remc1.net / 9064877624 to ask what the endpoint address is for your entity

   1. Vendors and other 3rd parties require a user/pass to be added to the FortiGate directly and provided to the vendor/3rd party (see step 10)

8. Put a check in the customize port box and enter 10443

9. Optional: Click the 'Save Login' radio button and in the Username Field type in your username.  This will be your email address e.g. ekemppainen@remc1.org.

10. If you are a vendor REMC1 will supply you with your username.  Contact REMC1 Support if you are unsure of your full username at 9064877624
    
    

11. Click 'Save'

After Using The KACE Distro

If you used the K1000 distribution:

1. Wait for a notification telling you that the settings were restored.

2. Open the FortiClient console.

3. Accept the EULA.
   
   

4. Make sure the individual's account is in the VPN group in active directory listed above. If this is an organization that doesn't have a domain connected to the FortiGate proceed to making a user in the FortiGate for them. 

5. You are ready to go. Enter your username (UPN if you are in the forest) and password.
   
   

1. You should see a red shield on your desktop titled FortiClient.  Run this by double clicking.  Alternatively, you may see a green shield in the lower right taskbar.  Right-click on that and select 'Connect to (whatever you named your profile)'.  See the pictures below
   
   

   
   
   

2. Type in your username (if you didn't set it up to auto-fill in the steps above).  This will be your email address. eg: jsmith@ccisd.org or djohnson@hpts.us.  If you are a Vendor: Contact remc1 if you are unsure of your full username

3. Type in your NETWORK login password.  This will be the same password used to log into your work computer and your email. It's all one login. If you are a vendor or outside entity/non REMC1 member then REMC1 will supply you with the password

4. Click 'Connect'.  If you receive a certificate warning (you shouldn't unless you used the IP address instead of fortigate.remc1.net as the remote gateway) accept the certificate to finish the connection
   
   

5. Remember to disconnect when you are done

6. To disconnect double click on the FortiClient shield icon on your desktop and then click 'Disconnect' in the window that pops up OR right click on the green FortiClient shield in your taskbar and select disconnect (see picture below)
   
   

   or 

OSX - Apple

1. Download the OSX client below and double click on the download. It will mount as a drive. You must open the finder and click on it like a disk drive and run the FortiClientUpdate.app as shown in the screenshot below.

2. A window will pop up. Click 'Continue', then 'Continue', then 'Agree to the license' (if you are UPGRADING then you will not see that step) then click the 'Customize' button on the lower middle part of the window (see screenshot below)
   
   

3. IMPORTANT NOW UNCHECK OTHER COMPONENTS or it will install a slew of annoying garbage such as webfilter, antivirus etc. which you don't need

4. Click the 'Install' button and finally the 'Close' button

5. On the top OSX Menu Bar click the Black Shield and select Open FortiClient Console OR Go to your Finder then click 'Applications' on the left side of that window then on the right side double click on the FortiClient icon with the red shield (see pictures of both methods below).
   
   
   

   
   or
   
   
   

6. Once open, click the 'Remote Access' tab on the left side of the window then the gray gear icon on the right part of the window and select Add New Connection (see picture below)
   
   
   

7. Select the SSLvpn radio button on top

8. Name your connection: eg: CCISD or Hancock Schools or REMC1

9. Remote Gateway: fortigate.remc1.net

10. Click 'Customize Port' and type in 10443

11. Click 'Save Login' checkbox
    
    
    

12. Type in your username in the Username field. This will be your FULL USERNAME which designates what district or entity you are employed with. e.g.: jsmith@ccisd.org or djohnson@hpts.us. Contact remc1 if you are a vendor/outside entity or are unsure of your full username.

13. Click the 'Add' button at the bottom right

Using The KACE Distro

If you used the K1000 distribution:

1. Deploy and wait for the software to install.

2. Please allow 30 seconds after the icons appear in Applications for settings to apply.

3. Client can then "double clicked" and it is ready for use.

1. On the top OSX Menu Bar click the Black Shield and select 'Open Forticlient Console' OR Go to your Finder then click 'Applications' on the left side of that window then on the right side double click on the Forticlient icon with the Red Shield (see pictures of both methods below).
   
   

   
   or
   
   

2. When the window pops up make sure your correct VPN Name is selected

3. Type in your username in the Username field. (skip if its already there and saved in the config from the initial setup) This will be your FULL USERNAME which designates what district or entity you are employed with. eg: jsmith@ccisd.org or djohnson@hpts.us . Contact remc1 if you are a vendor/outside entity or are unsure of your full username.

4. Type in your NETWORK login password. This will be the same password used to log into your work computer and your email. Its all one login. If you are a vendor or outside entity/non REMC1 member then REMC1 will supply you with the password.

5. Click 'Connect'

6. Remember to disconnect when you are done. To disconnect, click on the shield in the top menu bar as explained above or double-click the FortiClient red shield in Applications and click 'Disconnect'.  Screenshots for both methods are already included above

Apple IOS

• Available in the app store. Titled FortiClient. I recommend just using the built in ipsec feature of IOS but the SSLvpn FortiClient option does work well also. The settings are the same as explained above.
  
  
  

Android

• Available here: https://play.google.com/store/apps/details?id=com.fortinet.forticlient_vpn&hl=en or search for FortiNet in the Google Play Store.

Client Downloads

• Windows:  FortiClientVPN7.0.8.msi  

• MacOSX Client:  FortiClientVPNOnlineInstaller_7.0.dmg

• Linux 64bit Generic Client: forticlient_vpn_7.0.7.0246_amd64.deb 

• iOS: FortiClient VPN Version 7.2.2

• Android: FortiClient VPN Version 7.2.0

If the client isn't working, verify right group/credentials

You can test to be sure the access and credentials are right by going to https://fortigate.remc1.net:10443/