Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Log in using the link above and the user: admin password: (In REMC1 lastpass)
  • Click the Schedules button from the top bar of the Cyberdata v3.1 Paging Server web interface
  • Click the New button to add a new bell. A window pops up. Select the days this bell is active and the time to play the bell.
  • The time is in military time/24hr time.
  • Dont forget to Name the event (1st hr bell or Beginning of day bell or lunch over bell etc. Something descriptive.
  • For the paging group just leave it at 00. For this application we dont use that setting/it doesnt mean anything.
  • AFTER MAKING CHANGES TO A SCHEDULE YOU MUST REBOOT THE BELLS SYSTEM FOR IT TO TAKE EFFECT

Making a bell ring ONLY the MS or HS

  • To have a bell ring ONLY the MS you would follow the same instructions as listed above BUT... for the paging group you would select Paging Group 02
  • To have a bell ring ONLY the HS you would follow the same instructions as listed above BUT... for the paging group you would select Paging Group 01
  • (details for REMC1 staff: PagingGroup01 is linked to multicast address 234.2.1.2 port 2002. hsmsintercom zone section has zone 1 linked to that address for listening and when activity is detected on that address and port the audio is played out zone 1 (the HS zone). PagingGroup02 is linked to multicast address 234.2.1.3 port 2004. hsmsintercom zone section has zone 2 linked to that address for listening and when activity is detected on that address and port the audio is played out zone 2 (the MS zone). 


Saving  a bell schedule to your computer for later

...