Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  2. Download and install: SSL VPN Client Software
  3. Run the install. Installation may require local admin privileges. At one point the install MAY download updates from fortinet. THIS MAY PAUSE FOR EVEN 10MIN AT 0% you must be patient it will continue if you have an internet connection.
  4. After running the install you should see a red shield on your desktop titled Forticlient. Run this by double clicking.
    FortiClient desktop icon display
  5. You will get a Forticlient Console window. Click the blue "Configure VPN" link in the center of the white area (see picture below)
  6. Windows Forticlient console page, configure vpn link display
  7. Fill in the connection name
  8. The Remote gateway is kboccvpnvpn.remc1kbocc.netedu 
  9. Put a check in the customize port box and enter 10443
  10. Optional: Click the Save Login radio button and in the Username Field type in your username. This will be your Active Directory/Network login that REMC1 previously added to the KBOCC-VPN group on the server.  If you are a vendor REMC1 will supply you with your KBOCC VPN username.
    Windows Forticlient edit vpn connection page display
  11. Click apply


  1. You should see a red shield on your desktop titled Forticlient. Run this by double clicking. Alternatively, you may see a green shield in the lower right taskbar. Right-click on that and select "connect to (whatever you named your profile)" See the pictures below.
    FortiClient desktop icon display
    Windows Forticlient right click, connect to profile path display
  2. Type in your username (if you didn't set it up to autofill in the steps above).  If you are a Vendor: Contact REMC1.
  3. Type in your NETWORK login password. This will be the same password used to log into your work computer. It's all one login. If you are a vendor or outside entity/non REMC1 member then REMC1 will supply you with the password.
  4. Click Connect. If you receive a certificate warning (you shouldn't unless you used the IP address instead of kboccvpnvpn.remc1kbocc.netedu as the remote gateway) accept the certificate to finish the connection.
  5. Windows Forticlient console login page display
  6. Remember to disconnect when you are done.
  7. To disconnect double click on the Forticlient shield icon on your desktop and then click Disconnect in the window that pops up OR right click on the green Forticlient shield in your taskbar and select disconnect. (see picture below)
    Windows Forticlient console connected page displayor Windows Forticlient right click, disconnect from profile path display


  1. Download the OSX client below and double click on the download. It will mount as a drive. You must open the finder and click on it like a disk drive and run the as shown in the screenshot below.
    OSX finder, fortigate client update path display
  2. A window will pop up. Click Continue, then Continue, then Agree to the license (if you are UPGRADING then you will not see that step) then click the customize button on the lower middle part of the window (see screenshot below)
    OSX install Forticlient page, customize button display
  3. IMPORTANT NOW UNCHECK OTHER COMPONENTS or it will install a slew of annoying garbage such as webfilter, antivirus etc. which you don't need
  4. Click the Install button and finally the close button.
  5. On the top OSX Menu Bar click the Black Shield and select Open Forticlient Console OR Go to your Finder then click Applications on the left side of that window then on the right side double click on the Forticlient icon with the Red Shield (see pictures of both methods below).

    OSX menu bar black shield, open forticlient console path display

    OSX finder tool, Applications, forticlient console path display
  6. Once open click the Remote access on the left side of the window then the gray gear icon on the right part of the window and select Add New Connection (see picture below)

    OSX forticlient console page display
  7. Select the SSLvpn radio button on top
  8. Name your connection: KBOCC (for example)
  9. Remote Gateway: kboccvpn vpn.remc1kbocc.netedu
  10. Click Customize Port and type in 10443
  11. Click Save Login checkbox

    OSX forticlient vpn add connection page display
  12. Type in your username in the Username field.  Contact remc1 if you are a vendor/outside entity.
  13. Click the Add button at the bottom right