REMC1 staff: This page serves as a basic user guide. Most likely if you are configuring things you will need: /wiki/spaces/AV/pages/14975187 since it contains administrative details. |
Please note, there are no pins/codes/ect in the Bosch system. They have been antiquated. |
To arm the system please do the following:
Alarm will disarm automatically when an exterior door is opened using the card system. Do not scan your badge on the alarm system.
If the alarm will not enter a ready state, follow the steps below:
If the alarm goes off, follow this procedure:
The card reader can have 3 different light colors.
Color | Alarm State | Alarm System State |
---|---|---|
Red | Armed | Alarm is armed. |
Amber | Disarmed | Alarm is not ready to be armed and is currently disarmed. |
Green | Disarmed | Alarm is disarmed and ready to be armed. |
The system will send notifications to E-Mail and Slack. They will look like this:
09/26/2019 6:40PM 425 Alarm, Ar-1 CCISD, Pt-4 LC Reception - Panic Button |
Now, let's take this apart to see what each section does.
Color | Purpose |
---|---|
Red | Time the event occurred. |
Blue | Account this occurred for and event. Alarm is when something occurs, point restore is when it goes back to normal. |
Orange | The area in which this event occurred. Some locations only have one area. Others have multiple. |
Black | The name and number of the point in fault. This is the place in the building with the issue. Do not ignore this section. |
For motion and door alerts you will receive both a "point in alarm" notification and a "point restored" notification. "Point in alarm" indicates when the event first started and "point restored" indicates when it stopped occurring. If this time is very short (about a minute) this is most likely a false alert.