You should have received a printout with the Hotspot for home use it can also be found here if another copy is needed
Once you get your hotspot to where you are going to use it plug it in and making sure that the hotspot is on.
If it is a Verizon Jetpack this can be done by pressing the button on the upper right corner of the device until the screen turns on this may take a minute or two so be patient.
If it is a TMobile hotspot this can be done by pressing the button on the middle of the bottom of the device until the screen turns on this may take a minute or two so be patient.
Once the hotspot is powered on all the way you should be greeted with a home screen.
The network name is: REMC1HomeNetwork
The password is: SupportNet
These will be important in connecting your devices to the wireless network.
In order to maximise your service is is important to find a good location to put your hotspot.
When your chromebook starts up you will be prompted to connect to a wireless network, if you are not already. Select the network name listed above then enter the password listed above.
If this is not the case use the menu that can be opened by clicking the wifi symbol in the yellow box shown below. Then click the connect to wlan button shown in red bellow. This will open the menu seen in the second picture.
The REMC1HomeNetwork network should be shown here select it then enter in your password.
In the lower right corner there is a wifi symbol or a no internet symbol.
In the upper right corner there is a wifi symbol or a no wifi symbol.
Here are some general tips on where to best locate your mobile hotspot to improve mobile broadband and Wi-Fi signals:
If you run into any problems contact REMC1 support at (906) 487-7624 or support@remc1.net