Controlling Bosch Alarm Systems Manually From Avigilon

Inside of Avigilon, you can check the status of the alarms as well as set them to arm. In order to check the status, go to Monitor > Intrusion Status

From there, you will be on the Panel page, which shows the status of the alarm panel.

You can also set the alarm to arm. To do that, go under the Area tab, check the area you'd like to have the alarm set for, and pick Delay Arm under the Master dropdown.

• Do not pick instant arm or the Force options. These will not follow the configuration and will cause issues.
• MAKE SURE to first check if there are any doors that are propped open.

NOTE: if you are manually adjusting the alarm settings, you will need to disable your door schedule(s.) See Avigilon Day-to-day Scheduling